Key to Notes        
Most vehicles: PCD 5x120  Bore 72.5mm  Bolts M12x1.5-17
E39: PCD 5x120  Bore 74.0mm  Bolts M12x1.5-17
E10/E21/E30/Z1: PCD 4x100  Bore 57.0mm  Bolts M12x1.5-17
R50/R53: PCD 4x100  Bore 56.0mm  Bolts M12x1.5-17
R56: PCD 4x100  Bore 56.1mm  Bolts M14x1.25-17
E83/E65: PCD 5x120  Bore 72.5mm  Bolts M14x1.5-17
E53: PCD 5x120  Bore 72.5mm  Bolts M14x1.5-19
E70: PCD 5x120  Bore 74.0mm  Bolts M14x1.25-19        

1.   Reworking the rear wheel housing may be necessary (rolling the inside edge) 
2.   Reworking the rear wheel housing is required (rolling the inside edge).  
3.   Reworking the bumper panelling in the region of the wheel arch.  
4.   Drawing out the rear wheel arches      
5.   Repainting the rear wheel arches may be necessary.    
6.   Pay attention to sufficient clearance in the front wheel housing (if necessary, rework the panelling of the wheel housing).       
7.   Ensure a minimum clearance of 5 mm between the tire and the spring plate. 
8.   A steering limiter is required.       
9.   Only in conjunction with a spacer on each side of the rear axle.   
10. Only in conjunction with a spacer on each side of the front axle.  
11. Only in conjunction with a spacer on each side of the front and rear axle. 
12. Ensure to cover the tire tread sufficiently on side of the front axle.  
13. Ensure to cover the tire tread sufficiently on each side of the rear axle.  
14. Verification of speedometer required      
15. Not suitable for 330i (E90 / E91)       
16. Uses M14x1.5/60 bolts        
        
Resources used
Hartge website
H&R spacer gutachten
AC Schnitzer website
Alpina website
Elite Direct Website

To be completed
use resources from realoem.com
AC Schnitzer fitments yet to be completed
Does not yet include Ac Schnitzer \'racing\' wheels, designed for the wide body conversions
Breyton/Hamann fitments (printed leaflet)
Fitment notes for Alpina/ACS
email any corrections or additional fitments to chris@alloywheelsdirect.net